How to Clean the ESD Mat:

1. Unplug and clear the area

   • Remove any devices, tools, or components from the mat.

   • Disconnect the mat from the ground if necessary.

2. Dust or vacuum the surface

   • Use a soft brush or vacuum with an ESD-safe attachment to remove loose particles and debris.

3. Apply ESD-safe cleaner

   • Spray the cleaner directly onto the mat, or dampen the cloth with it.

   • Avoid harsh chemicals like alcohol, bleach, or ammonia — they can damage the mat’s properties.

4. Wipe the surface

   • Use a soft, lint-free cloth or sponge to gently wipe the surface.

   • Don’t scrub aggressively, especially on dual-layer mats.

5. Rinse (if needed)

   • If the cleaner requires rinsing, wipe again using a cloth dampened with deionized or distilled water.

6. Dry the mat

   • Use a dry, clean cloth to remove excess moisture.

   • Let the mat air dry completely before reconnecting grounding wires or placing components on it.

Avoid:

• Using household cleaners or solvents.

• Soaking the mat or submerging it in water.

• Using rough scrubbers or abrasive materials.

How Often Should You Clean It?

• Light use: Once a week.

• Heavy use or sensitive environments (e.g., cleanrooms): Daily or after each shift.